How to Install Cable UTP Straight Type and Cross


Perhaps many of you are wondering, why an article on how to install a straight UTP cable type and cross my new post today. Should have a way to set the cable network is my first post before I posted an article about creating networks (LANs) Between two computers. This is due, on Which the Computer World article, a friend asked me Had to post the article about setting the type of UTP cable and a straight cross.
I likened to give a bowl of meatballs without a spoon. In fact, I told Them to buy their own spoon in computer stores. Once he remarked. I speak in the invite instead of computers talk meatballs. Ha ... ha ... There Ipin there pal. Thanks stuffed pal. I really need to enter That Way. Well to answer questions from Ipin pal, just so I discussed about how to install a straight UTP cable type and cross. Let not the article's too long. You'll even lazy to read it.
Before you practice, 'there is'''that Some hardware you need to prepare, Among Others:
1. UTP cable (unshielded Twisted Pair). UTP cable is commonly Used categories 5 UTP cable (UTP Cat 5). Why? Because the Cat-5 UTP cable supports data transfer up to 100 Mbps. This cable consists of eight small, has A Different colors. The cable color is Orange, Orange White, Blue, Blue White, Green, Green White, Brown, and White Chocolate.

2. The second is Jack RJ-45. Jack is similar to a home phone jack. Just a Bigger size. RJ-45 jack consists of 8 pins, in accordance with the number of UTP Cables.

3. Crimping Tools Crimping or Tang. Hardware That is similar to a pair of pliers. However, unlike its function pliers in general. Crimping tool allows you to clip the cable on RJ-45 Jack.

All the above hardware Can you get at most computer stores. The price is not too expensive.
UTP cable, Straight Type
OK. Now I am not discussing how to install. The first is how to install a straight UTP cable type. For that, do the Following Steps:
1. Peel the end of the cable about 1 cm, so the cable into small pieces in it seemed.
2. These wires and straighten Pair. Then collated and trim based on its color is White Orange, Orange, Green White, Blue, Blue White, Green, White Chocolate, and Chocolate. After That cut the edges so the flat of one another.
3. After the cable is made, take Jack RJ-45. As I said before, Jack is comprised of eight pins. Pin 1 of the pin jack is located on the left if the position of the pins facing you. Sequential to the right is a jack of two, three, and so forth.

4. Then inserting the wires into the RJ-45 Jack in accordance with this sequences Mutation Is
o Orange White on Pin 1
o Orange at Pin 2
o Green White on Pin 3
o Blue at Pin 4
o Blue-White on Pin 5
o Green at Pin 6
o Chocolate White on Pin 7
o Brown on Pin 8.
Insert the cable Until its end stuck inside the jack.
5. Enter Jack RJ-45 cable is plugged into my mouth That was an appropriate crimping pliers Until the pin RJ-45 Jack resides in the mouth of pliers. Now fix this jack with crimping pliers Until all the pins stuck in the Cables. Usually if it Had stuck a pin jack would utter a sound "click".
Now you've finished installing the RJ-45 jack on the cable end first. For the second cable end, the Steps Are The Same as the installation of the cable end first. For that, repeat the Steps for installing Jack RJ-45 cable at the end of the second.
The Composition of a straight UTP cable types Cans you see in the picture Below:

UTP Cross Cable Type
How to install a straight UTP cable Earlier type I described. Now I discuss on how to install the type of cross UTP cable. How to UTP cabling cross the Almost the Same type by placing a straight UTP cable type. The installation technical about the Same as before. The difference is the color sequence at the end of the cable wires to the second. To the end of the first cable, the cable arrangement similar to the Composition of a straight UTP cable types are:
• Orange to Pin 1
• Orange White on Pin 2
• Green on Pin 3
• Blue on Pin 4
• Blue and White on Pin 5
• Green White on Pin 6
• White Chocolate at Pin 7
• Brown on Pin 8.
For the second cable end, the Composition of Different colors with the first tip. Composition is The Natural Mutation
• Green White on Pin 1
• Green on Pin 2
• Orange White on Pin 3
• Blue on Pin 4
• Blue and White on Pin 5
• Orange at Pin 6
• White Chocolate at Pin 7
• Brown on Pin 8.
The Composition of this cable Can you see in the picture below.

0 komentar:

Template by : kendhin x-template.blogspot.com